Panasonic EB-GD67 - Manual (Page 48)

Disabling the Alarm
1 From Idle F Q, select Applications > Clock Function >
Alarm Set F Q
2 Use e to select the alarm to be disabled F Q three times
3 Use e to select Disabled F Q
When disabled, following the same procedure will re-enable the alarm.
Adjusting the Alarm Time
1 From Idle F Q, select Applications > Clock Function >
Alarm Set F Q
2 Use e to select the alarm to be adjusted F Q
3 F+ Hold B to remove the current alarm time
4 Enter the digits for the time F Q twice
5 Use e to select the frequency of the alarm F Q
6 Use e to select the ring type F Q
Setting a Power On/Off Time
The phone can be set to turn itself on or off
automatically at a specified time using the Power
On/Off feature. The procedure for setting/adjusting
the Power On/Off automatically is similar to that for
setting the time on the clock. For either setting or
adjusting the time needed to select Power On
Time or Power Off Time in the Clock Function
menu.
Caution: Ensure that the setting of the Alarm or Power On function will
not contravene any regulations whereby it may automatically power on
when in an aircraft or medical facility etc. - see “Important Information”
page i.
34
Applications