Hitachi 50C10 - Manual (Page 40)

40
ASPECT MODE
Aspect Mode
Auto Aspect
Automatically adjust the Aspect Ratio depending on the input signal to fill the screen.
Press CURSOR buttons
̆
,
̄
, to select menu item.
Press the SELECT button to select. A “ ✓ ” in the box indicates that the feature is ON.
Vertical Position
This function allows you to select when aspect style is either 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9 ZOOM. Vertical position can be
changed with these modes. For example, it will be useful for centering the picture area at both the top and bottom of the picture with
480i/480P signal. Adjustable range is -10 (video center is toward bottom of screen) to +10 (video center is toward top of screen).
Press the CURSOR buttons
̆
,
̄
, to select menu item.
Press the CURSOR buttons
̇
or
̈
to adjust the function.
Press EXIT to quit the MENU, or select ASPECT to return to the main menu.
Use this function to select the Picture Format Aspect Ratio.
NOTES: 1. The Auto Aspect function is recommended on an input signal with VIDEO ID.
2. The Auto Aspect function is best used on component video, S-Video, and 480i composite signals.
3. See page 23 for Aspect Mode availability.
NOTE: Vertical Position will not be available in 4:3 Standard and 16:9 Standard modes.
ON-SCREEN DISPLA
Y