Harbor Freight Tools 93853 - Manual (Page 2)

SKU 93853 For technical questions, please call 1-800-444-3353 PAGE 2
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed in this manual
may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Item Description
Electrical Requirements 120 VAC / 60 Hz / 1500 Watts
20 AMPs (Start Up) / 9.5 AMPs (No Load) / 13.0 AMPs (With Load)
Power Cord Type: 82” Long / 14AWG x 2C
Power Cord Plug Type: 2-Prong / Polarized
Power Switch Type: 2-Position Toggle Switch w/Slider Cover
Blows Per Minute 900 ~ 1800 BPM (Using Variable Speed Dial)
Variable Speed Settings 1-2-3-4-5-6
Handle Types Fixed Main Rear Handle (7” x 4-1/4” x 1-3/8”)
Rotating Swivel “D” Style Auxiliary Handle (6” x 5” x 1-1/4”)
Included Chisels Bull Point (13-7/8” Long / Qty. 1)
Spade (1” Wide x 13-7/8” Long / Qty. 1)
Chisel Shank Size 45/64” Diameter
Chisel Hardness Bull Point (51 HRC) / Spade (52 HRC) / Tolerance (30 ~ 53 HRC)
Chisel Retainer Quick-Release Retainer
Overall Dimensions 22-1/4” L x 8” W x 11” H
Net Weight 34 Pounds
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
Note: SDS and SDS MAX chisels (both not included)
can be used with this Demolition Hammer
REV 06/06