haier HWM65-0566 - Manual (Page 9)

4 Use the operation buttons
Indicator mode and meaning
Flashing, indicating the running program
On, indicating the program about to run or the selection mode
"Start/pause" button
After the power is switched on, press it to
start the machine
During working, push it to pause.
During pause, push this button to restart
and go on working
Connection between the water inlet hose and the washer
1. Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
2 Put the nut of the water inlet hose on the valve jointer.
3 Fasten the nut. Swing it gently to confirm if it's suitable.
nut of the water
inlet hose
jointer of the
water inlet valve water absorption
cushion.
Connection between the jointer of the water inlet hose and the water inlet hose
1. Push down the slider. Insert the water inlet hose into the jointer.
2 Hang the lock lever to the jointer. Release the slider till a click
sound is heard.
Locking level
the jointer of the
water inlet hose
Slider
Check the connection between the jointer of the water inlet hose
and the water faucet
1. Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Dismantle the water inlet hose
1. Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull of the water inlet
hose.
If the machine is used frequently, the jointer of the water inlet hose can be
kept
on the faucet to prevent damaging the fixing screw.
Locking level
Slider
a
3 0
Push and hold the WATER LEVEL button and SPIN button,
then push down the POWER ON/OFF button. The digitron
displays
. ART/PAUSE button.
The child lock function isactivated. All of the buttons are locked
and cannot make selection.
Release the child lock function: push down the RESERVE and
SPIN button at the same time for more than 2 seconds. After a beep
sound, the child lock function is released.
CL After setting, push downthe ST
CHILD LOCK FUNCTION
Push the SOAK button to set
the soak procedure.
During STANDARD NORMAL
and JEAN programs, push the
SOAK button to set different
soak time (10,20,30 minutes)
During FIBER program,
push the soak button to select
soak procedure, but the soak
time cannot change.
During QUICK and WOOLLEN
programs, push the SOAK
button, the machine have no
reaction.
SOAK button WASH button
Push the WASH button to set
the wash procedure.
During STANDARD
NORMAL and JEAN
programs, push the wash
button to set different wash time
(6,9,12,15 minutes)
During FIBER program,
push
the WASH button to select
wash procedure, but the wash
time cannot change.
During QUICK
WOOLLEN
Programs, push the wash
button the machine have no
reaction.
RINSE button
"Overflow" digitron is
lighting,the program of the overflow
rinse has been selected.
Push the RINSE button to set the rinse
and procedure.
During STANDARD
NORMAL and
JEAN programs, push the RINSE
button to set different rinse times ( 0, 1,
2, 3, 4times).
While the
During FIBER programs, push the
RINSE button to select rinse procedure,
but the rinse times cannot change.
During QUICK
, WOOLLEN programs,
push the RINSE button, the machine
have no reaction.
Push the SPIN button to set
the spin procedure.
During STANDARD
NORMAL
and JEAN programs, push
the SPIN button to set different
spin time(1,3,5,7minutes)
During FIBER program, push
the SPIN button to select spin
procedure, but the spin time
cannot change.
During QUICK , WOOLLEN ,
programs, push the SPIN
button, the machine have no
reaction.
SPIN button
Soak Soak
Wash Wash
Rinse Rinse
Spin Spin
Description of the function of buttons
Soak Soak Wash Wash Rinse Rinse Spin Spin
Over flow Over flow