haier 0010552537 - Manual (Page 14)

2.Select operation mode
Press FAN button. For each press, fan speed changes as
follows:
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Remote controller:
Then Select DRY operation
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1
o C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
increase 1
o C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4.Fan speed selection
3.Select temp.setting
5.Unit stop
Air conditioner is running under displayed fan speed.
In DRY mode, when room temperature becomes 2
O C
higher than temp.setting,unit will run intermittently at
LOW speed regardless of FAN setting.
Press ON/OFF button, the unit stops.
AUTO
LOW MED HI AUTO
COOL DRY FA N HEAT
Operation
Dry Operation
1. Unit start
Press ON/OFF on the remote controller, unit starts.
Remote controller
13
On the displaying board,colorful displaying bar will be
light blue
FRESH
STERILIZE