Heatcraft Refrigeration Products BN-CMTB - Manual (Page 3)

3
®
3
Features & Benefits
Cabinet
Air moves across the ceiling in both directions providing even air distribution throughout the cooler
compact, ceiling mount and center mount design allows for shelving and storage of product around all walls
Heavy-gauge grained aluminum cabinet cleans easily and looks attractive
Stainless steel screws prevent rust streaks
Panels on ends quickly remove for complete access to refrigerant components and electrical terminal block during
installation and servicing
Quick disconnect, waterproof plug and receptacle for each motor in all models
Wire fan guards with PVc coating for durability
•
•
•
•
•
•
•
Coil
High-efficiency aluminum fins with full collars cover mechanically expanded copper tubes
coils are dehydrated and sealed at the factory
Highest quality tubular heaters provide fast and economical defrost
Generous coil surface gives proper compressor balance
Standard adjustable defrost termination fan delay thermostat •
•
•
•
•
Drain Pan
Double drain pan eliminates drain pan sweating
Tapered mounting provides proper slope for condensate drainage to one end of the unit •
•
Motors
Motors are life lubricated and thermal overload protected
Ec motors (optional) available factory-installed or as a drop-in replacement through InterLink™ commercial
Refrigeration Parts in 115/1/60, 208-230/1/60 voltages
PSc motors are optional for 115/1/60, 208-230/1/60 voltages
PSc motors or Ec motors are required for 50 Hz operation
•
•
•
•
Options
Unit configurations: mounted components, pre-assembled, pre-charged and beacon II™
- Units available with mounted TXV and mounted TXV / solenoid valve
- Pre-assembled units come with mounted TXV, liquid line solenoid valve and room thermostat
- Pre-charged units come with mounted TXV, liquid line solenoid valve, room thermostat and quick connect fittings
- Mounted room thermostat
- beacon II units come with electronic expansion valves, pressure transducer, temperature sensors and beacon
control board
• Most models available with glycol circuiting (see glycol product brochure)
• Units available with stainless steel housing and drain pan
• Units available with copper fins. Air defrost units also available with polyester coated fins or various coil coatings options
•
All Bohn Center Mount units are UL listed for US and Canada and meet NSF standards