beautypg.com

End-of-cycle signal, Closing the top lid, Selecting the water level – haier WD-9999-14 User Manual

Page 20: Recommended water levels, English

background image

End-of-Cycle Signal

The machine will beep at the end of the cycle, indicating that the washing is

complete. The “Wash/Rinse/Spin” indicator lights will still be ON. The washer

will turn OFF automatically in approximately 10 minutes after the completion of

the cycle.

Closing the Top Lid

For safety purposes, the top lid must always be closed during the wash process.

If you open the top lid while the wash cycle is in progress, you will observe the

following:
• An alarm will sound.
• The tub will not spin while the lid is open.
• If the unit is in wash mode, it will stop running.
Simply close the top lid and press the start/pause button to resume the cycle.

Selecting the Water Level

• There are 3 pre-set water levels to chose from: Low, Medium and High and 1

manual overide selection using the knob. Your selection may depend on your
wash load.

• Turning the knob to “MANUAL” will add more water to your wash load as long

as it is held in that position. Release knob after setting to the desired water level
by manually adding water.

Recommended Water Levels

Load Size in lbs

Water Level

Approximate

Water used in

Gallons

3.3

High

8.72

1.76

Medium

5.81

Less than 1.76

Low

3.70

English

English

Low

Manual

Water Lev el

Medium

High

19

This manual is related to the following products: