haier WD-9999-14 - Manual (Page 16)

Power ON/OFF: (1)
• Press the POWER button once to turn ON the power to the washer.
Press it again to turn the power OFF.
Start/Pause: (2)
• Press this button once to start the wash process. Press this button
once again to pause the activity during the wash cycle. Push it
again to resume the wash cycle.
CYCLE Select: (3)
• Select your desired cycle program by pressing the “CYCLE Select”
button. There are 3 main washing cycles, Normal, Heavy and
Quickwash, along with a total of 7 wash operation options.
Press the CYCLE select button for the desired setting.
Water Level Selector: (4)
• Turn the Water Level Selector knob to select the proper water level setting. You
may select from low, medium and high water level settings depending on the
wash load. There is also a MANUAL overide, by holding the knob in the
manual position, until the desired water level is achieved
Function and Status Indicator Lights: (5)
• The function display lights indicate that a selected
feature is ON or what the cycle is about to begin.
• During the wash cycle, a flashing light indicates the current STATUS of
wash/rinse/spin cycle.
Note: Rapid flashing indicates that the washer is not operating properly.
Power
CYCLE
S t a r t
Pause
NORMAL
HEAVY QUICK WASH
The Control Panel
STATUS
NORMAL
English English
operating your washer
STATUS
HEAVY
CYCLE
QUICK WASH
NORMAL
3 5 2 1
Low
Manual
Water Lev el
Medium
High
4
15
HLP021-WM