7 hd and vd output(be-ir20 only), Function setting and changes, Location of chip resistors(main board side b) – Hitachi Infrared B/W Camera Module BE-IR20 User Manual
Page 18
11. Function setting and changes
BE-IR20 / 21
17
11-7 HD and VD output (BE-IR20 only)
The BE-IR20 can be provided with horizontal and vertical drive outputs by changing chip parts.
Change the following chip parts to provide HD and VD outputs.
R233
R239
R240
R241
R242
R248
R249
R250
Factory setting
0
Ω
Absent
0
Ω
Absent
0
Ω
Absent
0
Ω
Absent
HD & VD output
Delete
0
Ω
Delete
0
Ω
Delete
0
Ω
Delete
0
Ω
0
Ω
Part code
RME1784
Type
ERJ3GEYJ0R00V
Connector pin assignments after
change
Location of chip resistors(Main board side B)
Note:
Note:
Note:
Note: The accessory cable cannot
The accessory cable cannot
The accessory cable cannot
The accessory cable cannot
be used for signal outputs.
be used for signal outputs.
be used for signal outputs.
be used for signal outputs.
Pin No.
Signal
Video out
Video GND
GND
+9V
HD out
VD out
HD/VD GND