HHB comm HHB MDP500 - Manual (Page 24)

OTHER FUNCTIONS
PORTADISC MDP500 MiniDisc Recorder
24
1. Press the SYSTEM button until ‘HEADPHONE
MONITOR’ is recalled.
2. Press F1 to select from ‘STEREO’, ‘MONO-L’,
‘MONO-R’ or ‘BOTH’ and then press F2 to confirm.
Press F3 to exit.
The digital output on the PORTADISC can be switched
off, preventing digital howlround when connected in a
loop with other digital equipment.
1. Press the SYSTEM button until ‘DIGITAL OUTPUT?’
is recalled.
2. Press F1 to select either ‘OFF’ or ‘ON’ and then
press F2 to confirm. Press F3 to exit.
This facility is provided to avoid any accidental operation
during recording. Each time you press the button for
more than two seconds, the hold function changes from
‘Key Hold ON’ to ‘Key Hold OFF’ and vice versa. The
following buttons can still operate even when the keyhold
function is on: KEY HOLD, LIGHT, MARK, DISPLAY and
POWER. The remote control connection will not be
affected by this function; i.e., it is always enabled.
The PORTADISC uses the Serial Copy Management
System (SCMS), which only allows first generation
digital copies of audio via the optical and coaxial digital
inputs.
DIGITAL OUTPUT ?
OFF SET EXIT
HEADPHONE MONITOR
STEREO SET EXIT
HEADPHONE MONITOR
KEY HOLD
COPY PROTECTION
DIGITAL OUTPUT
PDISC_OP.QXD 6/11/00 12:44 pm Page 25