Humminbird Wide Vision - Manual (Page 27)

ID+", the default setting, provides more information about the location of the target by attaching depth
"strings" showing the digital depth of the target. When there are numerous targets on-screen, not every
target depth is shown, to avoid excessive clutter on-screen.
ID "Off" disables the units interpretation of targets, and displays the "raw" sonar information as it is
received. Advanced users may prefer this type of presentation, so they can make there own interpretation
from the information displayed.
TripLog
TripLog provides a time/distance calculation, based on input from the speed accessory. The timer is
started when the unit is first powered, and distance information is collected to provide elapsed distance
since power up, and the average speed. To enable the TripLog display, press ENTER.
The TripLog can be reset at any time by pressing STOP. Press ENTER to return to the normal screen.