Hitachi DVPF73U - Manual (Page 31)

– 31 – EN
1L25
English
Adjust the Black Level Settings to make the black
parts of the picture as bright as you preferred.
1 Press MODE during playback.
2 Press ENTER to switch ON/OFF.
ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
3 Press MODE twice or RETURN to exit.
DVD
BLACK LEVEL SETTING
You can enjoy stereophonic visual space on your exist-
ing stereo system.
1 Press SURROUND during playback.
2 Press SURROUND to set it 1 (Natural effect)
or 2 (Emphasized effect) or OFF.
3 Press MODE or RETURN to exit.
Note (for CD play only)
¡ Virtual Surround will not be effective if the sound
mode is set to something other than STEREO.
MP3 CD DVD
VIRTUAL SURROUND
ON
OFF
You can change certain aspects of the DVD display
screens, on-screen messages and the display panel on
the front of the DVD/VCR.
1 Press SETUP in STOP mode.
2 Press B to select CUSTOM, then press
ENTER.
¡ CUSTOM mode will appear.
3 Press Arrow (s/ B) to select DISPLAY, then
press ENTER to con-
firm.
4 Press Arrow ( K / L ) to select the below
items, then press ENTER.
TV ASPECT:
¡ Press Arrow (K/L) for an item selection, then press
ENTER.
¡ Select 4:3 LETTER BOX for a black bars appears on
top and bottom of the screen.
¡ Select 4:3 PAN - SCAN for a full height picture with
both sides trimmed.
¡ Select 16:9 WIDE if a wide-screen TV is connected
to the DVD/VCR.
¡ The default setting is 4:3 LETTER BOX.
ANGLE MARK:
¡ Press ENTER repeatedly to turn Angle mark ON or
OFF.
¡ The default setting is ON.
AUTO POWER OFF:
¡ Press ENTER repeatedly to turn Auto Power off ON
or OFF.
¡ The default setting is ON and it will turn the
DVD/VCR to off automatically after 35 minutes of
no use.
LOGO:
¡ Press ENTER to switch ON (opening picture)/
OFF(black).
¡ The default setting is ON.
5 Press SETUP to exit.
Notes
¡ Be sure to press SETUP, or the setting will not work.
QUICK
DVD
DISPLAY SETTING
DISPLAY
TV ASPECT 4:3 L- BOX
ANGLE MARK ON
AUTO POWER OFF ON
LOGO
ON
H9451UD(EN).qx33 03.1.22 7:22 PM Page 31