beautypg.com

If you have a problem, Belt, Lubrication – Hoover ightweight Cleaner User Manual

Page 7: Service, When to replace

background image

7

Clean brush roll.
Replace Window, reposition screws, and
tighten securely.

3-11

3-12

When to replace

Replace the brush roll when the brushes
do no touch the edge of a card as it is
moved across the opening on the bottom
of the nozzle.

A new brush roll can be installed by your
local Authorized Hoover Dealer (Depot)
or Hoover Factory Service Center.

Belt

The long-lasting belt may never need to
be replaced. However, if the belt should
break, it can be replaced by contacting
your local Authorized Hoover Dealer
(Depot) or Hoover Factory Service Cen-
ter.

Lubrication

Lubrication is not necessary since the
motor and brush roll bearings are perma-
nently lubricated.

.

4. If you have a

problem

If a minor problem occurs, it usually can
be solved quite easily when the cause is
found by using the check list below.

Problem: Cleaner won’t run

Possible cause

Possible solution

• Not firmly plugged in.

Plug unit in firmly.

• No voltage in wall plug.

Check fuse or breaker.

• Blown fuse/tripped breaker.

Replace fuse/reset breaker.

Problem: Cleaner won’t pick up

Possible cause

Possible solution

• Dirt cup full.

Empty dirt cup.

• Filter clogged.

Empty dirt cup and clean filter.

• Nozzle clogged.

Remove debris from brush roll and

surrounding area

• Brush roll brushes worn

Replace brush roll

• Broken belt

Replace belt

Service

T

o obtain approved HOOVER service and

genuine HOOVER parts, locate the near-
est

Hoover Factory Service Center or

Authorized Hoover Warranty Service
Dealer (Depot)

by:

checking the Yellow Pages
under “Vacuum Cleaners -
Household” OR -

• checking the list of Factory

Service Centers provided
with this cleaner OR -

• calling

1-800-944-9200

for an

automated referral of
authorized service outlet
locations (U.S. only) OR -

• checking the Service section of

The Hoover Company on-line at

www.hoover.com

Please do not send your cleaner to The
Hoover Company in North Canton for ser-
vice, this will only result in delay.

If further assistance is needed, contact
The Hoover Company Consumer
Response Center, North Canton, Ohio
44720 Phone: 1-330-499-9499.

In Canada, contact Hoover Canada,
Burlington, Ontario L7R 4A8,
Phone: 1-800-263-6376.

Always identify your cleaner by the

com-

plete

model number when requesting

information or ordering parts. (The model
number appears in the middle of the back
of the cleaner body.)