Hitachi DVP335E - Manual (Page 18)

You can change certain aspects of the DVD display screens, on-screen
messages and the display panel on the front of the DVD player.
Press SETUP in STOP mode.
Press B to select CUSTOM, then press ENTER.
• CUSTOM mode will appear.
Press s or B to select DISPLAY, then ENTER to confirm.
Press K or L to select the below items, then press ENTER.
TV ASPECT :
• Press K or L for an item selection, then press ENTER.
• Select 4:3 LETTER BOX for a
black bars appears on top and
bottom of the screen.
• Select 4:3 PAN - SCAN for a full height
picture with both sides trimmed.
• Select 16:9 WIDE if a wide-
screen TV is connected to the
DVD player.
• The default setting is 4:3 LETTER BOX.
FRONT DISPLAY :
• Press K or L to select an item. Press ENTER, and then
select BRIGHT, DIM, or AUTO DIM with K or L .
• This adjust the brightness of the display panel with the fac-
tory default BRIGHT.
• When AUTO DIM is selected, the display dims only during playback.
ANGLE MARK :
• Press ENTER repeatedly to turn Angle mark ON or OFF.
• The default setting is ON.
AUTO POWER OFF :
• Press ENTER repeatedly to turn Auto Power ON or OFF.
• The default setting is ON and it will turn the DVD player to
off automatically after 35 minutes of no use.
VIDEO OUT :
• Press ENTER repeatedly to turn video out PAL or AUTO.
• Choose AUTO to play the discs recorded in the NTSC
system.
• The default setting is PAL.
LOGO:
• Press ENTER to switch ON (opening picture)/OFF(black).
• The default setting is ON.
Press SETUP to exit.
NOTES:
• Be sure to press the SETUP button, or the setting will not work.
• You can also choose the item by pressing the numbers.
5
QUICK
4
3
2
1
DVD
Display Setting
– 18 – EN
DVD SETUP
Language options are not available with some discs.
Press SETUP in STOP mode.
Press B to select CUSTOM, then press ENTER.
• CUSTOM mode will appear.
Press s or B to select LANGUAGE, then ENTER
to confirm.
Press K or L to select the be-
low items, then press ENTER.
AUDIO :
• Sets the audio language.
SUBTITLE :
• Sets the subtitle language.
DISC MENU :
• Sets the language for DVD Menu.
PLAYER MENU :
• Sets the language for the On-Screen display.
Press K or L to select a setting, then press
ENTER.
• If OTHERS is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter the code for
the desired language. (Refer to the language code list below).
• Only the languages supported by the disc can be selected.
Press SETUP to exit.
NOTE:
• Language Setting for Audio and Subtitle is not available with some
discs.Then use AUDIO and SUBTITLE. Details are on page 16.
6
5
QUICK
4
3
2
1
DVD
Language Setting
DISPLAY
TV ASPECT 4:3 L-BOX
FRONT DISPLAY BRIGHT
ANGLE MARK ON
AUTO POWER OFF ON
VIDEO OUT
PAL
LOGO ON
LANGUAGE
AUDIO ORIGINAL
SUBTITLE OFF
DISC MENU ENGLISH
PLAYER MENU ENGLISH