Hi-Touch Imaging Technologies PHOTOSHUTTLE 640PS User Manual

Page 15

-Firmware Update

Insert the memory card with the new firmware
Press OK to reconfirm and start updating

Note:
Please make sure your memory card is formatted and completely empty
before saving the new firmware into the card . Any related information
about new firmware, please go to

www.hi-ti.com

-Printer Setting

Position calibration

Put a 4x4 sticker into your paper cassette

Press PRINT to get the Position Calibrating format on the sticker

According to your print out, you must fill in the number of PART A and
PART B which match the sticker blade cutting line, in order to adjust the
horizontal and vertical margin.

Printout Setting

Brightness: Right for increase and Left for decrease

Contrast: Right increase and Left for decrease

Color R/G: Right for more red tone and Left for more green tone

Color B/Y: Right for more blue tone and Left for more yellow tone

Default: Return to original factory setting

OK: Save the change in Printout Setting and back to Printer Setting

Matte effect: Select to turn on/off the matte effect
Date print: Select to turn on/off the date printing on the photo (support on

EXIF file format)

OK: Save the change in Printer Setting and back to upper layer

-LCD Adjustment

Select functions between Brightness, Contrast, Color R/G, Color B/Y
Press Left and Right arrow keys to decrease or increase the value
Press Ok to save the setting and back to the upper layer

-Language

Press Up and Down arrow keys to select language for operation interface

-Clean Mode

Select clean mode to start cleaning process