HP V5040u - Manual (Page 30)

29
EN
Section 6
Viewing Pictures and Movies on a TV
Connecting to a High-Definition 16:9(Wide) TV
Connect one end of the HDMI cable to your camera’s HDMI Out port. 1.
Connect the other end of the cable to a television. 2.
Set video input source of a TV to “ HDMI” option. 3.
The steps for viewing stored pictures and movie on a TV are exactly the same as for viewing them 4.
on the LCD monitor.
( 16 : 9 )
Note
The camera can not run movie recording and picture taking when it is connected to an HDTV. The
LCD Panel does not display when the camera is connected to an HDTV.
Connecting to a Non-High-Definition 4:3 TV
Connect one end of the AV cable to your camera’s AV Out port. 1.
Connect the other end of the cable to a television. 2.
The steps for viewing stored pictures and movie on a TV are exactly the same as for viewing them 3.
on the LCD monitor.
Note
The LCD Panel does not display when the camera is connected to a TV.
( 4 : 3 )