haier AS072AZNBA - Manual (Page 13)

Operation
11
TIMER ON-OFF
To cancel TIMER mode
(1)After unit start, select your desired operation mode
Operation mode will be displayed on LCD.
Power indicator on indoor unit lights up.
(2) Press TIMER button to change TIMER mode.
Every time the button is pressed, display changes as follows:
Select TIMER ON-OFF. "ON" will flash.
(3)Time setting for TIMER ON
ON OFF ON OFF blank
Every time the button is pressed, time increases 10min.
If button is kept depressed, time will change quickly.
Every time the button is pressed, time decreases 10min.
If button is kept depressed, time will change quickly.
Time will be shown on LCD.
It can be adjusted within 24 hours.
After time setting, press TIMER button to confirm.
"ON" stops blinking, While "OFF" starts blinking.
(4) Time confirming for TIMER ON
(6) Time confirming for TIMER OFF
Follow the same procedures in "Time setting for TIMER ON".
Just press TIMER button several times until TIMER mode disappears.
TIMER ON TIMER OFF TIMER ON-OFF
AM refer's to morning and PM to afternoon.
Press HOUR button.
Time displayed: Unit starts at x hour x min.
(5)Time setting for TIMER OFF
After time setting, press SET button to confirm, "OFF" stops flashing.
Time displayed: Unit stops at X hour X min.
LOCK
RESET CODE
MODE SLEEP
CLOCK SET
TIMER
A
SWING FAN
TEMP
ON
OFF
1
3
6
2 4 5