HONDA BF20D - Manual (Page 33)

31
CONTROLS AND FEATURES
COOLING SYSTEM INDICATOR
(H type) Cooling System Indicator
TAKING CARE OF UNEXPECTED
PROBLEMS
Water should flow from the cooling
system indicator while the engine is
running. This shows that water is
circulating through the cooling
system.
The cooling system indicator port can
also become plugged.
When the overheat protection system
is activated, the engine speed will be
reduced to 1,800 rpm. If the
condition persists for another 20
seconds, the engine will shut off.
Refer to
TAKING CARE OF
UNEXPECTED PROBLEMS, p. .
Engine overheating may be the result
of clogged water intakes.
If water stops flowing while the
engine is running, that indicates a
cooling system problem, such as
clogged water intakes, which will
cause engine overheating. Refer to
, on p. .
101
101
07/09/19 18:21:29 31ZY0600_032