Harbor Freight Tools 5.5 HP ENGINE 96156 - Manual (Page 3)

Page 3 For technical questions, please call 1-800-444-3353. SKU 96156
save tHIs ManuaL
Keep this manual for the safety warnings
and precautions, installation, operating,
inspection, maintenance and cleaning
procedures. Write the product’s serial number
in the back of the manual near the assembly
diagram (or month and year of purchase if
product has no number). Keep this manual
and the receipt in a safe and dry place for
future reference.
IMPortant saFetY
InForMatIon
In this manual, on the labeling, and
all other information provided with
this product:
this is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. obey all
safety messages that follow
this symbol to avoid possible
injury or death.
danGer indicates a
hazardous situation
which, if not avoided, will result
in death or serious injury.
warnInG indicates a
hazardous situation
which, if not avoided, could
result in death or serious injury.
cautIon, used with
the safety alert
symbol, indicates a hazardous
situation which, if not avoided,
could result in minor or moderate
injury.
notIce is used to
address practices not
related to personal injury.
cautIon, without the
safety alert symbol, is
used to address practices not
related to personal injury.
warnInG! read all instructions.
Failure to follow all instructions
listed below may result in fire,
serious injury and/or deatH. The
warnings and precautions discussed
in this manual cannot cover all
possible conditions and situations that
may occur. It must be understood
by the operator that common sense
and caution are factors which cannot
be built into this product, but must be
supplied by the operator.
save tHese InstructIons
InstaLLatIon PrecautIons
Gasoline fuel and fumes are flammable,
1.
and potentially explosive. Use proper
fuel storage and handling procedures.
Do not store fuel or other flammable
materials nearby.
Have multiple ABC class fire
2.
extinguishers nearby.
Operation of this engine may create 3.
sparks that can start fires around dry
vegetation.
A spark arrestor may be required.
The operator should contact local fire
agencies for laws or regulations relating
to fire prevention requirements.
Install only to a lawn mower and only in 4.
an upright position.
Wear ANSI-approved safety goggles, 5.
heavy-duty work gloves, and dust mask/
respirator during installation.
Use only oil and fuel recommended 6.
in the “Specifications” section of this
manual.