Humax F1-4000T - Manual (Page 9)

GB8
In this example the terrestrial digital
receiver is operated together with the
satellite receiver. Both of the receivers
should be connected through a Scart
cable. Plug the Scart cable of the
satellite receiver into the VCR Scart
of the DVB-T receiver. As soon as the
satellite receiver is turned on, its audio
and video signals will be looped through
the terrestrial digital receiver.
This pattern corresponds to example 3
(see above). A VCR was switched
additionally to the configuration.
Connect the VCR with the satellite
receiver through a Scart cable. Plug the
Scart cable of the VCR into the VCR or
video Scart (if available) of the satellite
receiver.
Example 3
Example 4