Humax F1-4000T - Manual (Page 3)

This STB has been manufactured to satisfy the international safety standards.
Please read the following safety precautions carefully.
MAINS SUPPLY : 90 - 250V AC 50/60Hz
OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result
in fire electric shock.
LIQUIDS : The STB shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as base, shall be placed on the apparatus.
CLEANING : Disconnect the STB from the wall outlet before cleaning.
Use a light damp cloth(no solvents) to dust the STB.
VENTILATION : The slots on top of the STB must be left uncovered to allow proper airflow
to the unit.
Do not stand the STB on soft furnishings or carpets.
Do not expose the STB to direct sunlight or do not place it near a heater.
Do not stack electronic equipments on top of the STB.
ATTACHMENTS : Do not use any unrecommended attachments as these may cause hazard
or damage the STB.
CONNECTION TO THE ANTENNA :
: Disconnect the STB from the mains before connecting or disconnecting
the cable from the antenna.
FAILURE TO DO SO CAN DAMAGE THE ANTENNA.
CONNECTION TO THE TV :
: Disconnect the STB from the mains before connecting or disconnecting
the cable from the antenna.
FAILURE TO DO SO CAN DAMAGE THE TV.
EARTHING : The antenna cable MUST BE EARTHED to the system earth for the
antenna. The earthing system must comply with SABS 061.
LOCATION : Place the STB indoor in order not to expose to lightening, rain or sunlight.
Safety
GB2