HSM Securio B24 - Manual (Page 10)

10 0804
english
1 Safety instructions
2 Feed opening for CDs
3 Safety element / splinter protection
4 Operating and display unit
5 Name
plate
6 Shredded material container
7 Feed opening for paper and credit cards
8 Light
barrier
3 Machine components
Operating and display elements
Reverse button
Display options:
Container full
Cutting unit blocked
Container open
Ready for operation
Operation button
Switching on the shredder
• Press the operation button.
The “Ready for operation” indicator lights up.
Shredding paper
• When you feed paper, the light barrier auto-
matically starts the cutting unit.
Two seconds after the light barrier in the
paper feed opening is free again, the cut-
ting unit is switched off automatically and the
shredder switches to standby.
Note:
You can fold the safety
element upwards to
shred larger quantities
of paper. This makes it
easier to access the feed
opening.
Shredding CDs
(only in cut size: 3.9 mm, 5.8 mm)
•
Switch the shredder to permanent mode:
Press the operation button for four seconds.
• Only feed the material
into the insertion slot of
the safety element (splin-
ter protection).
• Switch off permanent mode: Press the
operation button.
Shredding credit cards
Feed the cards through the CD slot when the
cut size is 3.9 mm and 5.8 mm. For other ma-
chines, use the opening for paper.
Switching off the shredder
• Press the operation button.
The “Ready for operation” indicator goes out.
4 Operation
7
2
5
4
1
8
3
6