haier 29F3A - Manual (Page 10)

Watching TV continued
Swap function enables quick swap to the last watched program.
Auto scan function enables automatic successive scanning of all the programs in
memory with
(each channel will last about 2 seconds). "OFF" skip status
Program swap and auto scan functions
Program swap
1 Suppose the channel number
you used just now is 8 and the
channel number you are using
is 18 (as shown in the figure).
2 If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
3 If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
Auto program scan
1 If you want to select a
desirable program, you may
scan all the TV programs in
memory. You can simply press
the SCAN button to do this. The
program numbers will appear
o n e a f t e r a n o t h e r f r o m
beginning to end (each channel
number will last about 2
seconds).
2 If you want to stop the function
during auto scanning, simply
press the SCAN button again.
SWAP
SCAN
18
AUTO
DK
695.25MHz
8
AUTO
DK
199.25MHz
18
AUTO
DK
695.25MHz
1
AUTO
DK
62.25MHz
2
BROWSE
3
BROWSE
1
AUTO
DK
62.25MHz