beautypg.com

Before using your dishwasher, Ishwasher – Hotpoint Instructions User Manual

Page 10

background image

10

ARISTON DISHWASHER - Instructions for installation and use

D

ISHWASHER

Before Using your Dishwasher

Water hardness varies according

to where you live. If the water in

your home is hard, without water

softening, incrustations would

form on your dishes. Your

dishwasher is fitted with a water

softener which uses special salt to

get rid of limescale in the water.

Adjusting the water softener.

Your dishwasher can adjust its salt

consumption according to the hard-

ness of the water in your home.

This way, you can optimise and

customise your dishwasher's salt

consumption.

To adjust salt consumption, do as

follows:

1. Unscrew the salt container cap

2. There is an arrow on the neck

of the container (see figure): if

necessary, turn the arrow anti-

clockwise from the "-" setting

to the "+" setting.

Select the arrow position

depending on the water

hardness, referring to the table.

To prevent rust from forming,

load the salt just before

beginning a wash cycle.

W aterH ardness

Clarke

degrees

°fH

m m ol/l

Selector
position

Salt

consu

m ption
(gram s/
cycle)

A utono

m y
(cycles\2
kg)

0 14

0 17

0 1,7

/

0

/

14 36

18 44

1,8 4,4

" "

20

60

36 71

45

89 4,5

8,9

M ED

40

40

>71

> 89

> 8,9

"+"

60

25

You don't know how hard the

water in your home is? Ask

the company that supplies

water in your area.

Filling the salt container.

Always use salt which is intended

for dishwasher use.

The salt container is situated

underneath the lower basket, fill it

up as follows:

1.Pull out the lower basket

completely, unscrew and

remove the container cap

2. If it is the first time you add the

salt, first fill the container up with

water (you won't have to do this

again next time)

3. Put the dishwasher funnel on the

hole and pour in approximately

two kilos of salt. It is normal that

some water comes out of the

container.

4. Screw the cap back in place

carefully.

When to add salt:

The salt container should be filled

up when the low salt indicator light

“S” flashes.

The dishwasher will remind you to

do so for five consecutive wash

cycles.

Salt

IMPORTANT:

Only use recommend dishwasher

salt DO NOT use everyday table

salt, cooking salt as they contain

insoluble substances which could

harm your dishwasher.

WARNING:

DO NOT pour detergent into the

special salt container - This will de-

stroy the water softener.

IMPORTANT NOTICE:

3 in 1 dishwasher tablets are now available. These combine detergent, salt

and rinse aid ALL IN ONE. If the water in your area is hard or very hard, we

still recommend you add salt to the salt container to prevent white streaks

on your dishes and in the dishwashers interior.

Add rinse aid to the dispenser, only if you are dissatisfied with the results.

In all cases, please read the manufacturers instructions on the packet.

If you are only using the 3 in 1 products, after a number of cycles it is normal

for the salt and rinse aid indicator lights to flash permanently.

Issue date 9/10/03