Hamilton Beach 840132900 - Manual (Page 6)

6
Flat Beaters and Whisk
1. Make sure mixer is unplugged and
speed control is set to OFF.
2. Insert a beater or attachment into an
opening on the
bottom of the
mixer. Push
until it clicks
into place.
Repeat with
other beater or
attachment.
Twisted Wire Beaters
1. Make sure mixer is unplugged and
speed control
is set to OFF.
2. Insert wire beater with collar into
opening indicated by the illustration
on the bottom of mixer . Push
until it clicks into place. Repeat with
other beater or dough hook.
To Insert Attachments
Collar
w WARNING
Pinch and Crush Hazard
• Make sure that mixer is off and unplugged before installing or removing
attachments.
• Do not reach or insert utensils into bowl while mixer is running.
Failure to follow these instructions can result in broken bones, cuts or
other serious injury.
840132900 ENv01 2/14/05 4:15 PM Page 6