Heat & Glo Fireplace 6000 XLT - Manual (Page 39)

36
1. Lift the trim door up
and out of the unit.
2. Remove the wing
nuts, glass clips, and
the glass door from
the unit.
Figure 35. Glass Assembly
CAUTION HAND TIGHTEN THE WING NUTS, BUT BE
CAREFUL NOT TO OVERTIGHTEN.
1. Place the ember
material onto the top
of the burner.
Figure 36. Placement of the Ember Material
CAUTION IT IS STRONGLY RECOMMENDED THAT TRIM
DOORS WITH OPTIIONAL MESH SCREENS BE
INSTALLED ON PROPANE MODELS.