Homelite UT74121A - Manual (Page 7)

UK - Page 7
SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOL NAME EXPLANATION
Indicates danger, warning or caution. It means
attention!!! Your safety is involved.
Your manual contains special messages to bring attention
to potential safety concerns and machine damage, as well
as helpful operating and servicing information.
Please read all the information carefully to avoid injury
and machine damage.
Wear eye, hearing and head protection when operating
this equipment.
The SAFE-T-TIP ® nose guard on the guide bar helps
prevent kick-back.
No smoking, sparks or open flame.
Hold and operate the saw properly with both hands.
Do not operate the saw using only one hand.
Engines produce carbon monoxide, an odourless, deadly
poison. Do not operate in an enclosed area.
Danger – beware of kick-back.
Avoid bar nose contact.
Wear non-slip gloves.
To stop the engine, move the switch to the “O” STOP
position.
I = ON to Run
O = OFF to Stop
Safety Alert Symbol
Read Your Operator’s Manual
Eye, Hearing and Head Protection
SAFE-T-TIP ® Nose Guard
No Smoking
Operate with Two Hands
One Handed
Gloves
Bar Nose Contact
Kick-back
Carbon Monoxide
Switch
RUN
“O”
STOP