Huffy Portable System - Manual (Page 20)

20
P/N 211955E 01/04
41
39
47
43
43
53
49
52
Insert bolt (47) through left side upper elevator tube (43),
then stretch spring (41) onto bolt (47). Insert bolt (47)
through right side upper elevator tube (43) and secure with
nut (39).
Roll completed assembly to desired position. Secure assembly to ground using
anchor strap (52) and tie down stake (53). Fill tank with water (approx. 30 gallons
/115 Liters) or sand (approx. 255 lbs./113 kg) and snap cap (49) in place.
USE EYE PROTECTION
WHEN INSTALLING
SPRINGS.
WARNING!
DO NOT LEAVE
ASSEMBLY UNATTENDED
WHEN EMPTY; IT MAY TIP
OVER.
WARNING!
ADD TWO GALLONS (7.6
LITERS) OF NON-TOXIC
ANTIFREEZE IN SUB-
FREEZING CLIMATES.
CAUTION!
21.
22.