Hotpoint HCM60 - Manual (Page 7)

%
AMC-3
DESCRIPTION AND OPERATION
The coffee machine has two heating systems, one for heating the water and one for the coffee. It is possible to prepare
boiling water (for tea) or to use the steam (for cappuccino) and to prepare espresso coffee.
Unlike most other machines, in this coffee machine, the beans can be ground just when they are required, allowing you to
taste the aroma of freshly ground coffee at its best.
If the cup used is smaller than the quantity programmed by the machine, the coffee supply can be interrupted at any time by
pressing button 1 (Figure 1A/B), which also enables the user to select the most suitable quantity.
The degree of grinding can also be set, by turning the knob on the left of the machine to select a more coarsely or more
finely ground mixture, depending on the user’s requirements.
The boiling water supplied by the machine is particularly suitable for preparing tea, as the temperature is ideal.
The coffee machine lighting comes on automatically when the machine is switched on by pressing the on/off switch.
For safety reasons, the coffee machine switches off automatically as soon as it is taken out of the cabinet.
The boiling water from the distributor can also be used to preheat the cups.
If the coffee machine is not used for 120 minutes, it goes on stand-by automatically, reducing consumption to the essential
minimum, while still keeping the heating systems hot.
Fig. 1A
Fig. 1B