Hotpoint FFA90 - Manual (Page 6)

Controls
Fridge (top compartment): with temperature setting at 4˚C
Flashing downwards
arrow shows the fridge
compartment is
warming to reach 4˚C.
6
Flashing upwards
arrow shows the
fridge compartment is
cooling to reach 4˚C.
No arrow shows the
fridge compartment is
at 4˚C.
Note: The temperature displayed is the average temperature for the compartment, some
sections will be slightly warmer or colder.
The arrows will only be displayed if the temperature drifts, possibly due to the door being
opened, warm food being placed inside or a selected change in the temperature setting.
C
ONTR
OLS
What the display shows during normal operation:
Controlling the Temperature of the Fridge or the Freezer Compartment
You can check the temperature of the fridge freezer compartments by using a Fridge Freezer
Thermometer available from Hotpoint Genuine Part and Accessories Mail Order Hotline (see KEY
CONTACTS back page).
WARNING: Do not use a mercury filled thermometer, as breakage would cause a health hazard.
Your fridge freezer must NOT be placed in a room where the temperature goes below 6˚C or above
38˚C for prolonged periods, as the internal fridge temperature will not be maintained.
● Use the Compartment Select button to choose either the fridge compartment or the freezer
compartment.
● Press the Temp Change button to select a different temperature for the compartment. The
temperature will decrease, getting 1˚C colder for each press of the button, until the required
setting is reached or the coldest possible setting is reached (2˚C for the fridge compartment
and -25˚C for the freezer compartment).
● Once the coldest possible setting is reached, pressing the Temp Change button again will
return the temperature selection to the maximum setting (6˚C for the fridge compartment
and -18˚C for the freezer compartment).
Note: The display light will come on when you press any button and it will stay on for 12
seconds.