Hotpoint FFA90 - Manual (Page 4)

Installation
Levelling:
Level the fridge freezer when it is in its final location by adjusting the front feet, until
firm contact is made with the floor. This will stop rocking or vibration and keep the
door aligned which helps the fridge freezer run reliably and efficiently.
Note: Before plugging in and switching on, leave the fridge freezer standing
in its final location for at least 15 minutes to allow it to settle.
4
SAFET
Y &
INST
ALL
A
TION
Align the bottom hinge cover moulding
onto the cover plate slots.
Push until the part clicks into place.
Hinge Cover Mouldings:
After the front feet have been adjusted and the fridge freezer is level, fit the left and
right hand hinge cover mouldings supplied.
To fit: