Horizon Fitness RCT7.6 - Manual (Page 21)

21
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
USER FAVORITE KEYS
The user favorite keys allow up to two programs and program settings to be saved into memory. Using a
favorite key enables you to begin your favorite program quickly. To set a user FAVORITE KEY, follow the steps
as listed in the “SETTING FAVORITE KEYS” section.
SETTING FAVORITE KEYS:
1)
Press and hold the FAVORITE 1 or FAVORITE 2 key for five seconds until you
hear three beeps. The LED inside the FAVORITE KEY will be flashing.
*NOTE: The FAVORITE KEYS can not be programmed if you are already in a
program.
2) Select preferred program using the PROGRAM KEYS and press ENTER.
*NOTE: The CUSTOM 1 and 2 PROGRAMS (P5-P6) and THR ZONE 1 and 2
PROGRAMS (P7-P8) can not be saved into a FAVORITE KEY.
)
For P1, set TIME, INCLINE, and SPEED using the +/- KEYS and press ENTER
after setting each value. For programs P2 through P4, set LEVEL and TIME
using the +/- KEYS and press ENTER after setting each value.
) After you have selected your settings, press the FAVORITE KEY to save
the settings or press START to begin your program and your settings will
automatically be saved.
USING A FAVORITE KEY:
After you have programmed a FAVORITE KEY as listed in the “SETTING
FAVORITE KEYS” section, you may use the favorite key. Press the desired
FAVORITE 1 or FAVORITE 2 key then press START to begin the program.
*NOTE: The FAVORITE 1 and FAVORITE 2 keys may only be used before starting
a program. The keys will not function while in a program.