Harbor Freight Tools 66163 - Manual (Page 3)

SKU 66163 For technical questions, please call 1-800-444-3353. Page 3
an increased risk of electric shock if
your body is grounded.
Do not expose this Auto Vacuum
c.
to rain. Water entering the electric
components of this product will in-
crease the risk of electric shock.
Do not abuse the 12 Volt power
d.
Cord. never use the Cord for
carrying, pulling or unplugging
the Auto Vacuum. Keep the Cord
away from heat, oil, sharp edges or
moving parts. Damaged or entan-
gled cords increase the risk of electric
shock.
personal safety
3.
Stay alert, watch what you are do- a.
ing and use common sense when
operating the Auto Vacuum. Do
not use a power tool while you
are tired or under the influence of
drugs, alcohol or medication. A
moment of inattention while operat-
ing power tools may result in serious
personal injury.
Use personal protective equip-
b.
ment. Always wear AnSi-approved
safety goggles. Safety equipment
such as NIOSH-approved dust mask,
non-skid safety shoes, hard hat, or
hearing protection used for appropri-
ate conditions will reduce personal
injuries.
prevent unintentional starting. En-
c.
sure the power Switch (5) is in the
off-position before connecting to
the vehicle’s cigarette lighter out-
let, picking up or carrying the tool.
Carrying power tools with your finger
on the Power Switch or energizing
power tools that have the Power
Switch on invites accidents.
Do not overreach. Keep proper d.
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
Dress properly. Do not wear loose
e.
clothing or jewelry. Keep your
hair, clothing and gloves away
from moving parts. Loose clothes,
jewelry or long hair can be caught in
moving parts.
power tool use and care
4.
Avoid damage to the Auto Vac- a.
uum. Do not connect this Auto
Vacuum to an unfused circuit.
This product contains no internal
fuse.
Make sure any liquid vacuumed
b.
does not rise above the “MAX”
mark on the Container (2). Empty
the Container often when vacuuming
liquids.
Do not force the Auto Vacuum. a.
Use the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
Do not use the Auto Vacuum if the
b.
power Switch (5) does not turn
it on and off. Any power tool that
cannot be controlled with the Power
Switch is dangerous and must be
repaired.
Disconnect the 12 Volt power plug
c.
(11) from the vehicle’s cigarette
lighter/accessories outlet before
making any adjustments, changing
accessories, or storing the power
tool. Such preventive safety mea-
sures reduce the risk of starting the
power tool accidentally.
Store idle power tools out of the
d.
reach of children and do not al-