Mounting, Operation, Controls and indicators – Harbor Freight Tools 96549 User Manual

Page 6

Page 6

SKU 96549

for technical questions, please call 1-800-444-3353.

MOunting

Mount the Engine using the four mounting holes at the base (hardware not supplied).
Select a flat, level location able to withstand the weight, vibration, and the load device
connected to the Engine. If installed indoors, proper exhaust ventilation tubing

must

be installed. If installed outdoors, a weatherproof housing is recommended.

Install the Engine load.
The Engine load must be perfectly aligned with the Engine drive shaft to prevent undue
wear on the shaft and bearings. A qualified technician should perform this operation.

OperAtiOn

controls and indicators

Oil plug (1b)

dip stick
(8b)

drain plug

Muffler (4j)

engine switch (6k)

throttle
(18f)

choke
(15f)

gas Valve

drive shaft

fuel tank cap (11g)

Air filter

drain plug

spark plug (10c)

starter pull
cord (16k)

filter cup
(7g)

Muffler (4j)

Oil plug (1b)