Harbor Freight Tools 96549 - Manual (Page 3)

Page 3 SKU 96549 for technical questions, please call 1-800-444-3353.
specificAtiOns
Power Output 6.5 HP OHV Gas Engine, EPA approved
Displacement / Stroke 196 cc; 4-stroke
Ignition Type Electronic ignition (T.C.I.)
Cooling System Forced air cooling
Idling Carburetor Adjust 1700 +/- 150 RPM
Valve clearance Cold engine – Intake: 0.15 +/- 0.02mm;
Exhaust: 0.20 +/- 0.02 mm
Maximum Power Output 4.8 KW @ 3600 RPM
Maximum Torque 11-N.M./2500-RPM
Distributor Timing Intake valve opening: BTDC10°;
Intake valve closing: ABDC20°
Bore and Stroke 68 x 54 mm
Spark Plug Type BP6ES, BPR6ES (NGK), or NHSPLD F6RTCU; 0.7~0.8 mm gap
Gasoline Type Unleaded
Gasoline Tank Capacity 0.95 gallon (3.6 liters)
Drive Shaft Type Horizontal, ¾” straight, (3/16”) keyed shaft with ball bearings. Direction:
counterclockwise (facing shaft); Length: 2-1/4”; Central thread: 5/16”-24
Start Type Recoil
Speed 3600 RPM
Oil Capacity and Type 0.528 quart (0.5 liters); SAE 10W30 (in freezing weather use 5W30)
Engine Shaft Mounting Square pattern, 4 holes; 8.0-1.25 mm threads x 3-5/8” Bolt Circle
Base Mounting Pattern 3” x 6-3/8”
Weight 33.8 lbs.
Overall Dimensions 12-3/4” L x 14” W x 10-1/4” H
Recommended Applications To drive: pump, sprayer, tiller, chipper, shredder, log splitter
Features Low oil shutdown, automatic
Longer engine life with bearing supported shaft
Meets EPA certification (2007)
Fuel shutoff valve
The Emission Control System for this generator’s engine is warranted for standards
set by the U.S. Environmental Protection Agency. For warranty information, refer to the back
two pages of this manual.
save this Manual
You will need the manual for the safety warnings and precautions, assembly instruc-
tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with
this manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
sAfety wArnings And precAutiOns
wArning: When using this Engine, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment.
read all instructions before using this tool!
keep work area clean. Dark and cluttered areas invite injuries. 1.