Huffy POWER XPERT 1000 - Manual (Page 9)

03/04 P/N 211879
9
1.
1
Remove contents from tank
5”
(13 cm)
2.
Correctly identify each pole
section and mark indicated
distance from ends with tape
(not supplied) as shown.
3. IMPORTANT! Center the alignment slot of middle pole section (5) in the
lower hole of top pole section (4) as shown. While maintaining alignment,
bounce middle section of pole (5) into top section of pole (4) using wood scrap
as shown until they no longer move toward taped reference mark.
5”
(13 cm)
WOOD SCRAP
(NOT SUPPLIED)
5
4
TAPE (Not Supplied)
TOP
MIDDLE
BOTTOM
4
6
5
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM) MINIMUM
OVERLAP.
NOTE: