Huffy POWER XPERT 1000 - Manual (Page 18)

18
P/N 211879 03/04
15
1.
10 feet
(3.05 m)
Carefully upright assembly. Apply moving system label (15) to front of pole as
shown. Regulation rim height is 10 feet (3.05 m).
2.
30
29
27
29
Place assembled unit to desired location. Fill tank with water (30 gallons (114 liters))
or sand (360 lb. (163 kg)) and snap tank cap (30) in place.
Insert T-strap (29) through slot on back of base as shown. Secure unit to ground by
twisting tie down stake (27) into ground and hooking T-strap (29) onto tie down
stake (27).
29
SECTION C: APPLY HEIGHT AND MOVING LABEL & SECURING SYSTEM
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
WARNING!
DO NOT LEAVE
ASSEMBLY UNATTENDED
WHEN EMPTY; IT MAY TIP
OVER.
WARNING!