Emerson Radio PD6950 User Manual

Page 13

PROGRAMMED PLAYBACK

This CD player has a 19 track programmable memory system that allows you to

program up to 19 tracks on any CD. You can select only the tracks that you want to

hear and have them play in any order you want to hear them. The same track can

be programmed to play several times if desired.

NOTE : Programming can only be done when the player is in Stop mode.

1.) Press the PROGRAM button. The PROGRAM indicator

appears and Program Memory number 1 flashes in the
display.

2.) Press the

FWD or

REV buttons to select the first track

to be programmed. (Example: Track 3) The selected track
number flashes.

3.) Press the PROGRAM button again to enter track 3 into Program Memory

number 1. The display will momentarily show Program Memory number 1 and
then return to the flashing track number display.

4.) Press the

FWD or

REV buttons to select the next track to be

programmed. When the selected track number is flashing press the PROGRAM
button again to enter the track in Program Memory 2.

5.) Repeat Step 4 until you have entered up to 19 tracks in the program memory.

6.) Press the PLAY/PAUSE

button. The PROGRAM indicator

begins flashing and playback will begin on the first
programmed track.

7.) After all programmed tracks have played the player stops and the display

shows the total tracks on the disc. The PROGRAM indicator remains 'On' and
the program remains in the memory. Press the PROGRAM button and then
the PLAY/PAUSE

button to repeat the programmed sequence. If you press

only the PLAY/PAUSE

button, playback will begin on track 1 as usual but

the PROGRAM indicator remains 'On'.

To clear the program memory, open the CD door, switch from CD to Tuner function,
or shut the Power 'Off'. You cannot cancel the Programmed Playback mode by
pressing the STOP button.

P R O G R A M

PD6950_ib061402.p65

14/6/2002, 15:47