beautypg.com

Operating sequence, Automatic washing plus drying (non-stop operation), 1 place the laundry in the drum – Electrolux I N F O EW 1262 W User Manual

Page 13: 2 measure out the detergent, 3 measure out the additive, 6 select the temperature, 7 select the programme and start the machine, 8 at the end of the programme

background image

13

Important:

Before washing your first load of laundry, we recom-
mend that you run a cotton cycle at 60°C, with the
machine empty
, in order to remove any manufactur-
ing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.

Automatic washing plus drying (NON-STOP
operation)

This option is only possible for cottons and synthetics.
Maximum load:
– cotton, linen 3 kg
– synthetics

2 kg

1 Place the laundry in the drum

Open the door by press-

ing the

button and

place the laundry in the
drum, one item at a time,
shaking them out as
much as possible. Close
the door.

2 Measure out the detergent

Pull out the dispenser

drawer until it stops.
Measure out the amount
of detergent recom-
mended by the manufac-
turer in a graduated cup
and pour it into the main
wash compartment

.

3 Measure out the additive

If required, pour fabric

conditioner into the com-
partment marked

,

without exceeding the
«MAX» mark.

4 Select the required option

5 Select the drying time

Turn the selector dial clockwise to the required time
(red or blue sector, depending on the type of fabric).

P0877

P0876

P0004

6 Select the temperature

Turn the temperature

selector dial to the re-
quired value.

7 Select the programme and start the
machine

Turn the programme selector dial to the right to the
required setting and depress the ON/OFF button: the
operating pilot light and door locked light come on and
the machine starts.

8 At the end of the programme

The machine stops automatically.

Washing only

After a programme which stops with water in the
drum, the water must be emptied out before opening
the door.

It is normal to have to wait for about 2 minutes before
being able to open the door to allow the safety lock to
release. The door cannot be opened until the door
locked light goes out.

Depress the ON/OFF button again to switch the ma-
chine off, the operating pilot light goes out.

Remove the laundry.

Turn the drum by hand to make sure it is completely
empty, so as to avoid any forgotten items being dam-
aged in a subsequent wash (e.g. shrinking) or their
colour running into a load of whites.

Turn the water tap off and unplug the machine.

Leave the door ajar to air the machine.

P0080

P1011

1

P0880

95

°

Operating sequence