Emerson EWC19T4 - Manual (Page 19)

- 19 - EN
1C29
TV OPERATION
DEGAUSSING
Magnetism from nearby appliances and speakers
might affect the color of the TV picture.
If this happens, move this unit away from the appli-
ance. If the color is still not correct, unplug the
power cord, then plug it in again 30 minutes later or
so.
TV/VCR
WATCHING A TV PROGRAM
1 Turn on the unit
Press the POWER button to turn on the unit.
2
Select the channel number
Press the CHANNEL button K or L to select your
desired channel number or press the number on the
remote control.
Note for using the Number button on the remote
control:
¡ You must precede single-digit channel numbers
with a zero (For example: 02, 03, 04 and so on).
¡ When selecting cable channels which are higher
than 99, press +100 first, then, press the last two
digits. (Example: to select channel 125, first press
“+100” then press “2” and “5”).
Remember: If the unit is connected to a cable box or
satellite box, the unit must be on CH3 or CH4, then
the channel to be viewed must be selected on the
cable box or satellite box.
3 Adjust sound
Press the VOLUME button X or Y
to adjust the volume.
NOTES:
• If you press the CHANNEL button K or L in the
DVD mode, you can change the TV channels.
Even if you turn off the unit in the DVD mode, it
will go into the TV/VCR mode when you turn it on
again.
TV/VCR
PICTURE CONTROL
The unit’s picture controls – BRIGHT, CON-
TRAST, COLOR, TINT and SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a more natural looking image.
NOTES:
• Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.
Make sure ...
• The unit must be turned on.
1 Select “PICTURE CONTROL”
Press the PICTURE button on the remote control.
2
Select item you want to adjust
Press the Arrow button K or L until desired control
is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
3
Adjust the picture control
Press the Arrow button { or B to adjust to your
desired level.
• If there is a power failure of any kind, the unit
will retain its memory for this feature.
TV/VCR
VOLUME 20
C C C C C C C C C C C C
BRIGHT
– P P P P P P P P P P P P P P C C P P P P P P P P P P P P P P +
Arrow button s Arrow button B
BRIGHT to decrease to increase
brightness brightness
CONTRAST to decrease to increase
contrast contrast
COLOR to pale to brilliant
TINT to purple to green
SHARPNESS to soft to clear
T0052UC(p1-35).QX3 04.9.16 2:13 PM Page 19