Eureka 77 User Manual
Page 6
6
Keeping your Vacuum Cleaner Ready for Use
Return your vacuum cleaner to the wall bracket after every use. Firmly position into the
mounting bracket ensuring that the vacuum cleaner fits correctly into the charging socket.
It will then be recharged and ready for operation at all times.
The charger plug can be left in the electrical outlet at all times, even when the unit is in
use. It is impossible to overcharge the batteries. The charger plug will become warm,
however, this is not a cause for concern.
Charger
Plug
NOTE:
Charge the cleaner for 14-16 hours before initial use. The batteries of a
new cleaner are on a low charge.
How to Mount your
Vacuum Cleaner
5. Line the socket charger on the
wall bracket up with the
receptacle on the back of the
cleaner. Push the cleaner
against the wall bracket until
you hear the charger socket
click into place.
6. Plug the charger into an
electrical outlet.
7. The charging light will come on,
to indicate the vacuum cleaner
is charging.
Electrical Outlet
Charging
Socket
HOW TO USE
1. Push the power switch forward to turn on.
2. Pull the power switch back to turn off.
Off
On
Charging Light