Identify parts, Using the vacuum cleaner, How to wall mount your wall bracket – Eureka 77 User Manual
Page 5
Identify Parts
5
USING THE VACUUM CLEANER
1. To switch on, move the on/off switch forward toward the dust container.
2. To switch off, move the on/off switch backward toward the handle.
CAUTION: Use only charger model AD-0614-U1.
Your vacuum cleaner has a special bracket designed
to hold the unit, so that it may recharge while mounted
on the wall. The wall bracket can be positioned
whichever way is convenient for the location you
have chosen.
Mount on a wall where there are no dangerous objects
hidden beneath the wall surface like electrical wires,
pipes, etc.
1. Hold bracket against wall to mark location for
screws.
2. Use a 1/4 inch drill for drilling holes for the plastic
anchors.
3. Insert the anchors. Line up the bracket with the
anchors.
4. Use a screwdriver to drive the screws into the
anchors to secure the bracket.
How to Wall Mount your Wall Bracket
Charging
Socket
Holes for
Screws.
Screws and
Cavity Wall
Anchors
Dust Cup Latch
On/Off Switch
Motor Filter
Dust Cup Filter
Dust Cup
Charging
Socket
Wall Mount
Bracket
Charger
Plug
Charging Light