Eaton 9135 - Manual (Page 2)

With a wide range of acceptable input voltages, this UPS does
not depend on batteries to smooth out power fluctuations.
Batteries are conserved for those times when utility power
is highly unstable or completely out. If an outage occurs, the
9135 transfers to battery with no break in power, making this
an ideal UPS for equipment sensitive to voltage fluctuations.
More power in less space
High power density. The 9135 increases power density, deliv-
ering 6000 VA/4200W in only 3U of rack space, freeing more
rack space for IT and telecom equipments. Rail kits and tower
pedestals are included with every 9135 for flexible installation.
This UPS is even more user-friendly than its predecessors
offering greater distribution capabilities, with eight IEC 10A
& two IEC 16A outlets to power multiple pieces of equipment
without a PDU.
You can combine the 9135 with an Eaton enclosure PDU (ePDU™)
to power an entire rack of equipment from a single power cord
input. ePDU outlets can be monitored, switched, sequenced
and managed individually, providing maximum flexibility in
distributing power from the 9135.
Maximum availability for critical systems
Battery runtime for minutes or hours. During a power outage,
internal batteries in the 9135 keep loads running long enough
to gracefully shut down systems. Add up to four external bat-
tery modules (EBMs) to deliver more than an hour of extended
runtime at full load—or hours under lighter loads. Each EBM
occupies only 3U of rack space. These battery modules are
hot-swappable and can be replaced at any time without inter-
rupting UPS operation and load protection.
Maximum battery runtime for critical equipments. LanSafe
power management software enables independent control of
load segments. With this feature, you can manage scheduled
shutdowns and sequential startups of protected loads. During
a power outage, you could shut down power to less essential
loads to extend battery backup time for more critical devices.
When the load segments feature is used with optional Connect
UPS-MS connectivity cards, users can remotely re-boot lock-
ed-up network equipment. Simply access the ConnectUPS-MS
card over the network, and toggle the password-protected
load segment controller to get your network back online.
Service without downtime. The 9135 features hot-swappable
components and an automatic internal bypass. The UPS auto-
matically switches to an alternate power path within the unit
if it senses a trouble condition with an internal component.
Users can even remove and replace the battery and power
modules without powering down the UPS or interrupting po-
wer to loads.
ConnectUPS-MS Network Management Card web interface
Rack model and EBM installation
Hot swappable batteries
Load segments
2 EATON CORPORATION Eaton 9135 UPS