Electrolux EN3700AHW - Manual (Page 14)

Problem Possible cause Solution
The lamp does not
work. The lamp is defective. Refer to "Replacing the
lamp".
The door has been open
to long. Close the door.
Door interferes with
ventilation grill. The appliance is not level-
led. Refer to "Levelling"
Misaligned door The appliance is not level-
led. Refer to "Levelling"
As much as the advice does not lead to result, call the nearest brand-mark service.
6.1 Replacing the lamp
1. Disconnect the appliance from the
power socket.
2. Fold the lamp cover backward by
loosen the front edge.
3. Replace the bulb with one of the
same power and specifically designed
for household appliances (the maxi-
mum power is shown on the light dif-
fuser) and with E14 socket type.
4. Reconnect the appliance.
6.2 Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
"Installation".
3. If necessary, replace the defective
door gaskets. Contact the Service
Center.
7. INSTALLATION
WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
7.1 Positioning
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
Cli-
mate
class Ambient temperature
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
14 www.electrolux.com