Exmark Pioneer S-Series 0 - Manual (Page 16)

Specifications
– Steering is controlled by varying the position
of the levers relative to each other.
– Moving motion control levers outward (in
slots) locks the drive system in neutral.
• PTO Engagement Switch: Engages electric clutch
(to drive belt) which engages mower blades.
• Parking Brake Lever: Engages parking brake.
• Deck Height Adjustment Lever: Sets cutting
height to desired position.
• Deck Lift Pedal: Foot pedal that lifts deck.
• Transport Lock: Latching position: Automatically
latches at the transport position.
Seat
• Type: Standard seat with foam padded seat
cushion with armrests and integral safety switch.
Optional seat: Seat with high back, extra
wide foam padded seat cushion with internal
suspension, thick bolstering, two-tone cover,
armrests, integral safety switch, and seat vibration
isolation system.
Optional seat accessories for units with standard
seats:
– Custom ride suspension system to enhance
Standard Seat. Adds approximately 3 inches
(7.6 cm) to seat height.
– Deluxe suspension seat with high back,
(dampened, adjustable spring suspension),
armrests, and integral safety switch. Adds
approximately 1/2 inch (1.3 cm) to seat height.
• Mounting: Adjustable fore and aft on seat tracks.
• Armrests: Molded flip-up armrests.
• Seat Safety Switch:
Integrated seat switch. Time delay seat switch
eliminates rough ground cut-outs.
Hydrostatic Ground Drive System
• Two unitized hydrostatic transmissions:
– Units with 44, 48, or 52 inch decks:
Hydro Gear ZT3100
– Units with 60 inch deck:
Hydro Gear ZT3400
• Hydraulic Oil Type: Exmark Premium Hydro Oil.
• Hydraulic Oil Capacity: 77 oz (2.3 L) per side
• Hydraulic Filter: P/N 109-3321
• Speeds:
– Forward:
◊ Units with 44, 48, or 52 inch decks:
0-8 mph (12.9 km/hr) forward.
◊ Units with 60 inch deck:
0-9 mph (14.5 km/hr) forward.
– Reverse:
◊ Units with 44, 48, or 52 inch decks:
0-5 mph (8.0 km/hr) reverse.
◊ Units with 60 inch deck:
0-6 mph (9.7 km/hr) reverse.
• Drive wheel release valves allow machine to be
moved when engine is not running.
Tires & Wheels
Drive
Pneumatic (Air filled)
Deck Size 44, 48, & 52 60
Quantity 2 2
Tread Turf Master K500 Super Turf
Size 22 x 9.50-12 23 x 10.50-12
Ply Rating 4 4
Pressure 13 psi (90 kPa) 13 psi (90 kPa)
Front Caster
Pneumatic (Air filled)
Deck Size All Units
Quantity 2
Tread Smooth
Size 13 x 5.00-6
Ply Rating 4
Pressure 13 psi (90 kPa)
Cutting Deck
• Cutting Width:
– 44 inch Deck: (111.8 cm)
– 48 inch Deck: (121.9 cm)
– 52 inch Deck: (132.1 cm)
– 60 inch Deck: (152.4 cm)
• Discharge: Side
• Blade Size:
16