EnGenius Technologies 1X - Manual (Page 15)

~29~
effective only for the current call.
Do Not Disturb (Silent Ring)
1. Enter the key sequence MENU – Sounds – Ring
Volume, then select “Off”. Press SAVE to confirm
your choice. This will turn off the ringer until it is turn
on again from the menu.
2. For temporary silencing the ringer when an incoming
call arrives, press
SILENT (Left) soft key.
Key Guard
1. To prevent accidental dialing, you can press Menu
(Right) soft key, then press “1” to select KeyGuard
option. The handset keypad is locked. No key entry
is accepted except the power on/off key.
2. To unlock the keypad, press “ UNLOCK ” (Left) soft
key, then, within 2 seconds, press the digit “1” to
unlock.
3. Key Guard is in effect until unlocked or powered off.
To View Missed Call(s)
1. Whenever you have missed incoming call(s), you can
press VIEW soft key to enter the call logs information.
2. You need to subscribe the caller ID service from local
telecom company to retrieve this data.
Battery Recharge and Replacement
1. Charge the battery when one or several of the following happen:
a. Phone beeps twice every two seconds.
b. Battery icon is empty.
c. Phone does not respond when a key is pressed.
d. LCD and backlighting become dim.
e. Talk range shortfall is experienced.
2. You can replace the handset battery after placing the call-in-progress on
­ 11
Sounds: ÇÈ
1. Ring Volume
2. Ring Tone
­ 11
Ring Volume: ÇÈ
Off
SAVE
­ 11
Welcome!
UNLOCK
­ 11
Press 1 to
confirm
unlock
­ 11
You have 1
Missed call
VIEW MENU
~30~
hold.
3. Battery talk time and standby time vary depending on the talk/standby
pattern and the operating distance. Putting the handset back to charger
cradle as often as possible is recommended for best performance. Use
only manufacturer provided battery and charger!