Elo TouchSystems ET1529L - Manual (Page 32)

Rear Facing Customer Display
USB Customer Display
Plug in the USB cable attached to the Customer Display unit. The New Hardware Wiz-
ard dialog box will appear.
1 Choose Next and select “Search for the best driver for your device (Recommended)
” then choose Next.
2 When a list of search locations is displayed, place a checkmark on the drive contain
ing the driver package:
Touch Monitor Peripherals\Rear Facing Customer Displays\Drivers\xxx\LCLD9.sys,
where xxx is Win98 for a Windows 98 based system or 2000 for a Windows XP/2000
based system.
3 Insert the disk into your drive. (If the driver files have been copied to your hard drive
or have been distributed on CD, place a checkmark on “Specify a location” and browse
to select the directory containing the driver files.)
4 Choose Next. Once the Customer Display driver has been detected choose Next again.
5 Wait while driver files are copied to your computer.
6 Insert your Windows CD if prompted and choose Finish
2-26 Elo Entuitive Touchmonitor User Guide