Ericsson LBI-38732E User Manual
Page 67
ProSound
The radio may be programmed for ProSound system
scan operation for multi-site applications. ProSound
scanning is an enhanced replacement for wide area
system scanning. This algorithm insures that the radio
continually receives high quality audio. When the se-
lected system degrades to a pre-programmed level, the
radio changes to the new system and sounds a tone.
Should the control channel be lost completely, the radio
will scan the adjacent systems until a suitable one is
found.
Priority System Scan
The radio may also be programmed for priority sys-
tem scan. A priority system may be assigned among the
systems programmed into the radio. Radios programmed
in this manner will check for the priority trunked system’s
control channel at a programmable rate ranging from 1
to 16 minutes. This priority scan timer is reset each time
the PTT button is pressed or when a call is received. If
the priority system control channel is found, the radio will
automatically switch to the priority system.
Menu Selection
Press
M
and then use the
<
>
control
to scroll through the selections until SYS SCAN is dis-
played. Then press
M
to toggle the System Scan
state. The SYSC ON or SYSC OFF display message is
displayed for two seconds to show the new state.
67