Envision Peripherals EN-7100s - Manual (Page 9)

EN-7100s
9
v1_090802
EN-7100s
Before You Operate the Monitor
Adjusting the Viewing Angle
For optimal viewing, adjust the monitor's angle to
your own preference.
• Hold the stand firmly when you change the
monitor's angle.
• You can adjust the monitor's angle from -5° to
25°.
• Do not touch the LCD screen when you change
the angle. It may cause damage or breakage.
• Be careful to avoid pinching your hand in the
swivel base.
How to Install INF & ICM File
1. Insert the Windows 95/98/2000/ME/XP INF
Driver Disk into your floppy drive.
2. Follow the Add New Hardware Wizard
instructions on the screen.
3. If the wizard asks for the location of the driver
file, select drive A and press Next.