Emerson Radio ES830 - Manual (Page 17)

1 6
Listening To The Radio
1.) Press the STANDBY button to turn the unit ‘On’.
If necessary, press the FUNCTION button to select the Tuner mode.
The main display turns ‘On’. and shows
FM 87.5 MHz.
2.) Press the STOP/BAND button to switch
between FM and AM bands if necessary.
3.) Tune to the desired frequency as follows:
• Manual Tuning
Repeatedly press the or buttons until the frequency of the desired
station appears on the display.
• Automatic Tuning
Press and hold the or buttons until the display begins to move, then
release the buttons. The tuner will search up or down the band for the next
strong station and stop on that station.
Repeat this procedure until the tuner stops on your desired station.
Use the Manual Tuning method to tune in weak or distant station that cannot
be tuned automatically.
4.) If you tuned to an FM Stereo station the
“STEREO” indicator will appear in the display.
5.) Adjust the VOLUME and X.BASS controls as desired.
6.) When you are finished listening press the STANDBY button to return to the
Standby (Power Off) mode.
The display lighting becomes dimmer and the correct time reappears.
ES830_012005.p65 20/1/2005, 11:15 16